Category: events

March 12, 2019

JLC LIVE Building Clinic to Feature ThermalBuck

It’s time – the countdown begins.

The biggest building show in the Northeast, JLC LIVE kicks off in downtown Providence, RI March 27th – and this year, exhibitor ThermalBuck joins Rockwool, DuPont, and 3M as part of Bill Robinson’s building clinic, “Managing Moisture in Walls with Continuous Insulation”.

JLC LIVE New England is widely known as the best hands-on construction show in the business. Focused on live product demonstrations and popular building clinics, this show stands out as a great training opportunity for builders who want to fine-tune their building science knowledge and installation techniques.

“JLC Live is the one show all year that I can promise you, we won’t miss.”

-John Brooks, President, BRINC Building Products, Inc.

Two packed floors of exhibitors await the thousands of builders in attendance, and three days of educational sessions are open to all attendees. “JLC LIVE is the one show all year that I can promise you, we won’t miss,” John Brooks, President, BRINC Building Products, Inc. If you’re not already planning to attend this year’s show, please consider joining us for the show!

Grab your FREE PASS here – just enter promotion code EX235 and be our guest on the exhibit floor. You’ll find ThermalBuck at BOOTH #1037 – check out the floor plan before the show!

Building Clinics & Workshops

This is what makes JLC LIVE unique amongst trade shows – everywhere you look, you see action. JLC always has a packed schedule of exhibitor installation demonstrations, building clinics, and educational workshops. It’s truly a “hands-on” show, and that’s what makes it so popular.

This year, we’re proud to announce that ThermalBuck will be a part of nationally recognized trainer and building expert Bill Robinson’s building clinic “Managing Moisture in Walls with Continuous Insulation” held on March 29th & 30th, at 9:30 am on the upper level.

ThermalBuck joins distinguished building material veterans including Rockwool ComfortBoard, DuPont Tyvek, and 3M Corporation to help show builders how to successfully deal with the challenges of installing windows with exterior insulation.

Check out the full event program for a complete listing of clinics, and demonstrations that you won’t want to miss. You’ll want to catch Fine Homebuilding editorial advisor and well-known builder Mike Guertin for his popular Roofers Workshops, located on the second floor ballroom at JLC. His clinics include Roofing in High Wind Zones, Critical Roof Flashings, and 4 Ways to Shingle a Valley.

ThermalBuck at JLC

The 2017 show was our first time at JLC, and it couldn’t have been better. The highlight was when the Journal of Light Construction Senior Editor, Tim Healey, stopped by to shoot a short video to introduce ThermalBuck to readers of JLC who might have missed the show.

“This is one of the coolest new products I’ve seen.”

– Tim Healey, Senior Editor, The Journal of Light Construction, JLC Live 2017

http:/https://youtu.be/hZnUliLdd6o

Booth #1037 is where you’ll find ThermalBuck at the 2019 show, on the lower level, right by the Simpson Strong Tie demonstration booth. We’ll demonstrate how ThermalBuck solves many of the common challenges wood window bucks create: potential for moisture damage, shrinking, warping or rotting – all things that challenge the long term operation of windows. Not to mention wood is a thermal bridge, the very kind you’re trying to eliminate by adding continuous insulation in the first place. You’ll be able to compare the flashing steps for wood bucks vs. ThermalBuck, and see how much easier it is to get an airtight, watertight building envelope with ThermalBuck.

JLC Networking & Special Events

All work and no play is never a good idea, and plenty of fun is on the schedule. And this year’s JLC is no exception. This Old House has teamed up with JLC to help Rebuild the Trades, and offers several events promote the importance of apprenticeship programs to the future of the building industry. You’ll have the chance to hear from your favorite This Old House personalties such as Charlie Silva and Tom Sweenor, as well as highly-successful builders such as Matt Risinger, of Risinger & Co.

Check out all of the great networking events here, and don’t miss the Welcome Party Friday night from 5pm – 6pm in the Level 5 JLC LIVE Lounge. These events offer great opportunities for fellow attendees and speakers to connect, build relationships, and celebrate the future of building.

Since the March weather feels a lot like winter, take a few days off of the job site to expand your knowledge and invest in your training and skills in New England. We promise – the payback will be worth it.

JLC LIVE presents multiple shows across the U.S. The signature show is JLC Live New England, held every March on the east coast. Out west, you’ll want to attend JLC LIVE Northwest, held in December in Portland. The Remodeling Show & Deck Expo features a more intimate format, and is scheduled for Louisville, KY in November 2019. The official media sponsors of JLC LIVE include The Journal of Light Construction (JLC), Tools of the Trade, and Remodeling magazine.

February 15, 2019

BASF Features ThermalBuck at International Builders Show

BRINC Building Products, Inc. is proud to announce that the BASF Corporation will feature ThermalBuck as a continuous insulation solution in their 2019 exhibit at the International Builders Show on February 19-21st in Las Vegas, Nevada.

High-performance builders have consistently used a combination of interior and exterior insulation to achieve desired R-values for their wall assemblies. With the rapid adoption of advanced energy codes across the U.S., and increasing demand by consumers for energy-efficient homes, use of continuous insulation is becoming the standard for most builders. As this practice grows, more building professionals, insulation manufacturers, and window manufacturers are becoming familiar with the challenge this presents for window and door installation.

“BASF has always been an industry leader in building material technology. We appreciate the opportunity to work with them to share best-practice installation details with the building community at IBS.”

-John Brooks, president, BRINC Building Products, Inc., manufacturer of ThermalBuck

The Innovations of BASF

BASF is a company well known for its commitment to technological advancements in the building industry. Their Neopor^®graphite polystyrene (GPS) rigid foam insulation provides architects and builders with maximum efficiency, cost-effectiveness and sustainability for exterior insulation on construction projects.

Easily recognized for its steel-grey color, Neopor^® GPS is comprised of many small pockets of air within a polymer matrix containing graphite. The graphite reflects radiant heat energy like a mirror, increasing the material’s resistance to the flow of heat, or R-value. Most polymer-based foams exhibit a greater ability to slow the movement of heat as the temperature decreases. Neopor^® GPS is in a unique class because it increases in R-value as outdoor temperatures drop (neopor.basf.us).

When it comes to insulating value, Neopor^®consistently outperforms traditional EPS, XPS, polyiso, and mineral wool insulation. But like these others, it creates some challenges for window installation. Commonly used in Europe for decades, GPS insulation is now experiencing solid growth in the U.S., and BASF has found ThermalBuck to be an effective solution.

ThermalBuck Continuous Insulation

1.0″ ThermalBuck with 1.0″ Neopor graphite exterior insulation

“Builders have been so receptive to ThermalBuck because it’s such a simple, effective solution to the problems they face when installing windows with foam,” said BRINC President, John Brooks. “When insulation is added to the exterior of any structure, the rough opening remains set back at the sheathing. This can present problems with cladding attachment and trim, and the thicker the insulation – the bigger the problem,” said Brooks.

The traditional way builders dealt with the different planes was to build a wood buck to match the depth of insulation, install the window, then flash the window and wood buck. But wood is a poor insulator, and creates potential for moisture damage at each rough opening. Not to mention it creates a thermal bridge – a conduit for energy to pass through the rough opening around each window and door. When you’re adding insulation to a building, creating thermal bridges at all of the penetrations is really working against the goal of insulating.

“Builders have been so receptive to ThermalBuck because it’s such a simple, effective solution to the problems they face when installing windows with foam.”

-John Brooks, president, BRINC

ThermalBuck is a proven solution to the challenges architects and builders face with installing windows with exterior foam. It’s unique “L” shape goes inside the rough opening, and extends outward to match the continuous insulation and/or rainscreen depth, creating a flush plane for cladding.

With an r-value of 4.4 per inch, ThermalBuck insulates the rough opening to prevent thermal bridging. It supports the window and allows structural attachment, transferring shear and wind loads to the framing. Made of a high-density EPS with a waterproof coating, ThermalBuck is installed with high-quality window & door sealants, that allow it to act as an additional air & water barrier at the rough opening, simplifying flashing with exterior insulation. Lightweight, flexible, and durable, ThermalBuck comes in 8′ lengths and is cut to fit on site. It’s ideal for both residential and multi-family residential retrofits and new construction.

We look forward to sharing the stage with BASF in Las Vegas at the 2019 International Builder’s Show in Booth PB2, as part of the Professional Builder’s Show Village. Look to BRINC Building Products for more building envelope solutions in the future.

To learn more about energy-code adoption by state, visit the Building Codes Assistance Project. To read more about continuous exterior insulation, see what the experts at JLC online recommend as best practices. For great advice on choosing the right wall assembly, visit greenbuildingadvisor.com.

January 16, 2019

BRINC BP to Exhibit in Vermont & Wisconsin

The impact of non-profit organizations that promote energy-efficient building standards is growing. Some of the most successful outreach programs include regional events that bring together architects, builders, and high-performance building material experts facing the same set of climate considerations.

This February, BRINC Building Products will be exhibiting at two notable events in this realm: Better Buildings by Design (Northeast), and Better Buildings: Better Business (Midwest).

Better Buildings by Design

When we think of leaders in energy-efficiency and sustainability, we think of Vermont. It’s no surprise Vermont ranks among the top 5 states in the nation for the advancement and support of energy efficiency, and has long maintained a pioneering role among the states in this arena.

The American Council for an Energy-Efficient Economy (ACEEE) credits Vermont’s three energy efficiency utility companies as the driving force for Vermont’s ranking: Vermont Gas Systems, Burlington Electric, and Efficiency Vermont.

“Efficiency Vermont is really keen on helping with the social responsibility of living in Vermont.“

– Jennifer Severidt, Energy Consultant – Residential, Efficiency Vermont

We’ve been fortunate to witness firsthand the effectiveness of Efficiency Vermont on two housing projects. One, the Rutland Innovation Home, and two, the Central Vermont Habitat for Humanity House in Randolph. We look forward to contributing to their Better Buildings by Design event, the region’s leading design and construction conference.

Better Buildings by Design – February 6th & 7th

The Better Buildings by Design conference brings together over 1,000 attendees from all over the Northeast, and more than 60 exhibitors annually to Burlington, Vermont. Affordable Efficiency is a focus of the 2019 Better Buildings by Design event, and attendees will share their successes, failures, and strategies for the future. More than 40 workshops are available for attendees, featuring five learning tracks: Building Systems, Business Support, Commercial, Envelope, and Integrated Design.

BRINC Building Products is proud to be a Bronze Level Sponsor for this year’s event, and will be exhibiting ThermalBuck, the high-performance window buck. For a complete list of exhibitors and more information, check out the event homepage here.

Better Buildings: Better Business – February 14th & 15th

Seventh Wave is the force behind the Better Buildings: Better Business conference in Wisconsin.. Their mission is “To advance economic and environmental sustainability through engineering, education and research”. With offices in Chicago and Madison, this non-profit works with utility programs, offering services such as education, financial incentives, and technical assistance for building owners and design teams to exceed the Illinois energy code standards.

The Better Buildings: Better Business conference will be held February 14th & 15th, in Wisconsin Dells, at the Kalahari Resort and Convention Center. Nearly 60 exhibitors and sponsors focused on advancing the residential building and remodeling industry are part of the two-day event. It also features multiple workshops and keynote speakers, which will focus on advancing the building industry for a clean energy future. Visit seventhwave.org for a full list of exhibitors.

Want to learn more about energy-efficient organizations in your region? Check out our post, Advancing the Energy Codes, for more information on the six REEOS, or Regional Energy Efficiency Organizations to get started.

November 6, 2018

ThermalBuck to Exhibit at Architecture Boston – ABX 2018

BRINC Building Products, Inc. is proud to announce that we will be exhibiting ThermalBuck at this year’s ABX (Architecture Boston) event in Boston, Massachusetts, November 28th-29th. ABX is widely known in the building industry as the largest design and construction event in the Northeast.

Hosted by the Boston Society of Architects (one of the oldest and largest AIA chapters), ABX has been advancing the green building community in the Northeast for over 150 years. The ABX conference is valued for its regional focus – building relationships and a local network in New England, with shared climate, economics, and politics.

This year’s two-day event is expected to draw approximately 8,000 attendees from across the Northeast. It offers over 100 educational sessions, and more than 300 exhibitors covering 50 product categories in the building industry. Features like the Open Architecture Collaborative, CE Learning Zone, and the Design Technology Throwdown provide unique opportunities for collaboration with peer networks.

For a full schedule of events, check out abxexpo.com.

ThermalBuck – The Continuous Insulation Solution

ThermalBuck has gotten a great response in the Northeast, as builders in New England are more readily using continuous insulation. “ThermalBuck is the product we desperately needed, but didn’t know about. Fortunately it became available and to our attention just in time! We have used it on every project since, even our office renovation,” Alan Benoit, Principal Architect, CPHC, AIA, Sustainable Design of Vermont. ThermalBuck is widely distributed in the Northeast via Boise Cascade, Westfield, MA, (413) 572- 2995. Please contact your local lumberyard for more information.

“ThermalBuck is the product we desperately needed, but didn’t know about. We have used it on every project since, even our office renovation.”

– Alan Benoit, Principal Architect, CPHC, AIA, Sustainable Design of Vermont, Manchester Center, VT

Free Pass for the Exhibit Floor

If you’re a building professional in the New England market, please be our guest on the exhibit floor. Download your FREE PASS, and visit us at BOOTH #824 at ABX on November 28th & 29th.

You’ll see why ThermalBuck is a game-changer in the building material industry, and an ideal solution for energy-efficient architects and builders.

See you in Boston!

October 16, 2018

BRINC Building Products, Inc. to Exhibit ThermalBuck at Greenbuild Nov. 14-15th

The Greenbuild International Conference & Expo is a powerhouse event in the building community, bringing together a diverse community of professionals from all over the world to learn about sustainable building practices, and the latest technologies for the built environment.

BRINC Building Products, Inc. is proud to announce that we will be exhibiting ThermalBuck at this year’s event in Chicago, Illinois on November 14-15th, joining hundreds of building material manufacturers committed to the continuing advancement of sustainability in the building community.

Greenbuild is an ideal forum for ThermalBuck, as many architects and builders are looking for building material solutions that help fulfill their mission to design and build more sustainable buildings. “We thought we had maxed out every way to reduce a building’s carbon footprint and then we found out about ThermalBuck. It’s a key high-performance component that is helping us towards achieving our firm’s mission of designing net zero buildings,” Nathan Kipnis, FAIA, LEED BD+C, Kipnis Architecture + Planning, Evanston, IL.

“We thought we had maxed out every way to reduce a building’s carbon footprint and then we found out about ThermalBuck. It’s a key high-performance component that is helping us towards achieving our firm’s mission of designing net zero buildings.”

– Nathan Kipnis, FAIA, LEED BD+C, Kipnis Architecture + Planning, Evanston, IL

2018 Greenbuild: Human x Nature

The theme for Greenbuild 2018 is Human by Nature // The Intersection of Humanity & The Built Environment. It’s message conveys that green building benefits all of humanity, by making sustainable environments accessible to everyone. Through this achievement, the natural environment will be protected and preserved for future generations.

Greenbuild began back in Austin, TX in 2002 as a small event with 4,000 attendees, and has since grown into a truly global force to promote sustainability.

The 2018 schedule is comprised of over 200 educational sessions, workshops, green building tours, and networking opportunities throughout the entire week, kicking off Monday November 12th and ending Saturday, November 17th. The first official day of the show, Wednesday, November 14th, begins with the opening plenary by featuring Amal Clooney, international human rights lawyer and professor. The traditional (and usually sold-out) Greenbuild Celebration, held on day two of the expo, Thursday, November 15th, features locally sourced food, drink, and entertainment by seven-time Grammy Award winning blues legend Buddy Guy.

Not only does Greenbuild offer the highest quality of educational and collaborative opportunities for attendees, it also significantly impacts the local environment where the show is held. The conference encourages sustainable practices and behaviors from attendees and exhibitors alike, proactively pursuing goals of reducing waste and offsetting carbon emissions. To read more about sustainability at Greenbuild, click here.

Visit ThermalBuck on the Exhibit Floor

Greenbuild is a special show for us. ThermalBuck was recognized at Greenbuild 2015 by Building Green as one of the “Greenest of the Green” top ten best new products at the show.

If you haven’t experienced Greenbuild in person, we welcome you to be our guest on the trade show floor, and see for yourself how this event provide unique opportunities for green building professionals to connect and advance the goals of sustainability for our built environment. Get your FREE exhibit floor pass (use promotional code THER0MC300), and visit us at Booth #1103 on November 14th & 15th. You’ll leave Greenbuild 2018 feeling inspired about the future of sustainable building.

April 23, 2018

ThermalBuck to Exhibit at Humid Climate Conference

ThermalBuck joins our high performance partners from Alpen windows to exhibit at the 2018 Humid Climate Conference in Austin, TX, on May 21st – 22nd. We will showcase our joint PHIUS Verified Psi-Installation, featuring the Alpen 925 Zenith Nail Fin window with 2.5″ ThermalBuck.

Hot, humid climates are not what usually comes to mind when talking about passive design. Historically, the focus has been on buildings with heavy heating needs, not cooling. Everything changed with the release of the PHIUS+ 2015 building standard, which forced the building industry to reconsider passive house design as an economically viable option for humid climates.

The Austin, Texas chapter of the PHIUS is a major advocate for building science education and training in humid climates. They recognized the need for an annual event to broaden the reach of their work, and bring together professionals in similar climates for a shared exchange of ideas and learning. The first Humid Climate Conference was held in 2016, and is rapidly becoming a notable event in the building industry.

“Our mission is to advocate for the adoption of the PHIUS+ 2015 standard in the greater Austin, TX area through education, governmental petition, and targeted industry efforts.”

– Passive House Austin (PHAUS), as quoted on passivehouseaustin.org

2018 Humid Climate Conference

This year’s event will be held at the A&T Conference Center in Austin, Texas, and provides the opportunity to earn 8 hours of CEUs, with an impressive lineup of speakers and invaluable networking.

Monday begins with one of the most recognizable names in building science, Joseph Lstiburek, presenting, “Water Molecule & 4th State Moisture, Materials, Enclosure” at 10 am. It ends with sought-after media personality and building science promotor Matt Risinger of Risinger & Co., presenting “Lessons Learned in the Evolution of High Performance Enclosures”.

Tuesday’s lineup features a full day of speakers, and wraps up with an after-party at 5:30 pm. The two-day event features a number of sponsors and exhibiting companies, such as the increasingly popular Building Science Podcast, an outreach of Positive Energy, a residential engineering firm in Austin. For a full list of event sponsors, click here.

ThermalBuck + Alpen HPP

ThermalBuck and Alpen are an ideal fit for architects and builders looking for the optimal way to install high performance nail flange windows with continuous insulation.

Alpen is a pioneer in the glazing industry, known for super-high performance insulated glass and award-winning fiberglass windows. Alpen designs and builds some of the most energy efficient window and door products in the world out of their Niwot, Colorado headquarters. They are the first North American manufacturer of passive house certified windows and doors, and offer superior technical support for their customers. Learn more at visit thinkalpen.com.

Take a look below at this quick Q&A with Alpen behind-the-scenes at one of our first Alpen + ThermalBuck installations, in Orderville, Utah. 

For more behind the scenes videos from this Alpen window installation, visit thermalbuck.com.

For additional information about the Humid Climate Conference and to register for this year’s event, visit humidclimateconference.org. You can also follow the conference updates on instagram. To learn more about Passive House Austin, click here.

February 28, 2018

It’s time for JLC LIVE – Get Your Free Pass

ThermalBuck is headed to JLC Live 2018 on March 23rd & 24th at the Rhode Island Convention Center, in downtown Providence.

And we’d like you to be there.

JLC Live New England is widely known as the best hands-on construction show in the business. Focused on live product demonstrations and popular building clinics, this show stands out as a great training opportunity for builders who want to fine-tune their building science knowledge and installation techniques.

“JLC Live is the one show all year that I can promise you, we won’t miss.”

-John Brooks, President, BRINC Building Products, Inc.

Two packed floors of exhibitors await the thousands of builders in attendance, and three days of educational sessions open to all attendees. If you’re not already planning to attend this year’s show, we invite you to be our guest.

Register and enter promotion code EX255 to print your FREE PASS to the expo hall

ThermalBuck at JLC

“This is one of the coolest new products I’ve seen.”

– Tim Healey, Senior Editor, The Journal of Light Construction, JLC Live 2017

Booth #409 is where you’ll find ThermalBuck at the 2018 show, on the upper level, right in front of the BUILDING ENVELOPE clinics. We’ll be focused on how ThermalBuck solves many of the common challenges wood window bucks create: the potential for moisture damage, shrinking, warping or rotting – all things that challenge the long term operation of windows. Not to mention wood is a thermal bridge, the very kind you’re trying to eliminate by adding continuous insulation in the first place. You’ll be able to compare the flashing steps for wood bucks vs. ThermalBuck, and see how much easier it is to install and flash.

Workshops & Clinics

Check out the full event program for a complete listing of clinics, and demonstrations that you won’t want to miss. Add to your to-do list “Moisture Management” through proper window installation and flashing, taught by industry veteran Bill Robinson of Train2Build. You’ll want to catch builder Steve DeMetrick too. He’ll be demonstrating new installation requirements for the “Building Envelope”. His clinics on Detailing Exterior Rigid Insulation, Innies and Outies, and The Basics of High Performance Walls, are sure to be some of the best ones at the show.

Networking at JLC Live

All work and no play is never a good idea, and plenty of fun is on the schedule. Check out all of the great networking events, but don’t miss the Welcome Party Friday night from 5pm – 6pm in the Level 5 JLC LIVE Lounge. Meet-ups offer great opportunities for fellow attendees and speakers to connect and relax.

Since the March weather feels a lot like winter, take a few days off of the job site to expand your knowledge and invest in your training and skills in New England. The payback will be worth it.

JLC LIVE presents multiple shows across the U.S. The signature show is JLC Live New England, held every March on the east coast. Out west, you’ll want to attend JLC LIVE Northwest, held in December in Portland. The Remodeling Show & Deck Expo features a more intimate format, and is scheduled for Nashville in October 2017. The official media sponsors of JLC LIVE include The Journal of Light Construction (JLC), Tools of the Trade, and Remodeling magazine.

January 18, 2018

ThermalBuck to Exhibit at Better Buildings by Design

“Our statewide and coordinated efforts provide equity, fairness and transparency—ensuring that every Vermonter has access to affordable products and services to lower their energy use.”

– Karen Glitman, Director of Efficiency Vermont, as quoted on vermontbiz.com

Efficiency Vermont was established in 1999, with the purpose of reducing energy costs and protecting the natural beauty of Vermont’s environment. It offers a number of opportunities for Vermont contractors, distributors, design professionals and homeowners to connect, and work together to save energy – and money.

One of their key initiatives is also the region’s leading design and construction conference, Better Buildings by Design.

Better Buildings by Design – February 7th & 8th

ThermalBuck extends, insulates, and flashes the rough opening. Integrated with Henry Blueskin WRB.

We sure get this whole “integrated design” concept. Recent ThermalBuck installation in Manchester Center, VT.

The Better Buildings by Design conference brings together over 1,000 attendees from all over the Northeast, and more than 50 exhibitors to Burlington, Vermont, February 7th & 8th, 2018.

Interactive learning is a focus of the 2018 Better Buildings by Design event, presenting practical information and the latest trends and technologies in the building industry.

Over 40 workshops are available for attendees, featuring five learning tracks: commercial, building systems, lighting, envelope, and healthy homes.

BRINC Building Products is proud to announce that we will be exhibiting ThermalBuck at this sold-out event, joining a select group of exhibitors that range from retailers like Curtis Lumber Co. and 475 Building Performance Supply, to manufactures of energy-efficient products like Roxul, Inc., Siga, and Smart Vent.

Putting It All Together – Integrated Design

This year’s theme “Putting It All Together – Integrated Design,” emphasizes the focus of the workshop content, and a key strategy of the presenters. Attendees can choose from a wide range of topics that include Integrated Teams, Integrated Project Delivery, and Integrated Design in a variety of scenarios.

Take a look at the full schedule of events, speakers, and listing of exhibitors here.

The opening session kicks off with awards honoring “Efficiency Vermont’s 2018 Best of the Best in Building Performance and Home Performance.” Attendees can view the plans, drawings, and photos of these award-winning homes and commercial buildings throughout the conference.

Wednesday evening, February 7th from 4:45 – 7:00 pm, attendees and exhibitors invite colleagues, clients and subcontractors to a reception in the exhibit hall that is open to the public. The reception features complimentary beverages and hors d’ oeuvres, as well as a cash bar. The exhibit hall will also be open to the public Thursday, February 8th from 1:30 – 3:30 pm.

While the exhibitor opportunities have sold out, you can still make plans to register and attend the conference. Or join us for the public reception Wednesday evening, and get a taste of what Better Buildings by Design is all about. Visit efficiencyvermont.com for more information.

The ACEEE published the most recent State Energy Efficiency Scorecard in September, 2017. This report ranks every state in the U.S. for their efforts in energy-efficiency, providing an extremely valuable tool for understanding how states handle and recover from severe weather related events such as hurricanes and flooding. The results guide state-level policymakers in their efforts to build more resilient local communities. To review key findings of this report, visit aceee.org.

January 5, 2018

ThermalBuck Innovator Named “HIVE 50 Honoree” by Builder Magazine

John Brooks, president of BRINC Building Products, Inc., was recognized by Builder Magazine as a HIVE 50 honoree in the category of Building Technology for his development of ThermalBuck.

ThermalBuck, a high-performance window buck, is a simple solution for the challenges of mounting nail flange windows with exterior insulation.

It’s unique L-shaped design goes inside the rough openings for windows and doors, and extends outward to create a flush plane with exterior insulation and/or rainscreens.

ThermalBuck is made of a type XIV high density EPS, and coated in a waterproof resin. Not only does it have the compressive and shear strength to handle the weight of large, high-performance windows, but it also insulates the rough opening with an R-value of 4.4 per inch, to limit thermal bridging. It also simplifies flashing, and creates an additional air & water barrier in the building envelope.

To learn more about ThermalBuck, take a look at our media coverage and recognition here.

HIVE – “Transforming the Conversation around Housing”

The HIVE Conference was initiated in 2016 by Hanley Wood, a premier marketing and media company in the residential and commercial construction industry. The two-day event takes place in California, and provides a unique opportunity to bring together a diverse group of talents to address the challenges in housing. Attendees include architects, builders, land developers, community planners, dealers and distributors, developers, manufacturers, policy makers, and more.

“The second annual HIVE Conference is shaping up to be our most ambitious and energizing event yet.”

-Peter Goldstone, CEO, Hanley Wood

The 2017 conference took place December 6th & 7th in downtown Los Angeles, at the Intercontinental hotel. It featured speakers such as Chip Conley, head of global hospitality and strategy, Airbnb, and Steve Case, chairman and CEO, Revolution LLC; co-founder, America Online; and author The Third Wave.

We appreciate the nomination of John Brooks for his development of ThermalBuck, and the recognition of how impactful this new building material technology is to the residential construction industry.

HIVE 50

The HIVE 50 are considered the top people, products, and processes that are influencing innovation and high performance technology in the housing industry.

The HIVE 50 nominees and winners are featured in the December 2017 issue of Builder Magazine, ten nominees in each of five categories: Building Technology, Capital, Design, and Strategy.

Fellow nominees that share the Building Technology with John Brooks, include notable building science veteran Joe Lstiburek, Founding Principal of Building Science Corporation, and CEO of Tesla, Elon Musk.

For a complete listing of all nominees for the HIVE 50 in each of the five categories, please visit builderonline.com.

Hanley Wood has focuses it’s business in three main areas: research, media, and marketing. It’s most recognizable media brands include Builder magazine, Architect magazine, and Remodeling magazine. In the conference realm, Greenbuild, ProSales, and JLC Live are just a few of their well known and respected events in the industry. To maintain the conversation with the HIVE community year-round, visit hiveforhousing.com.

November 22, 2017

Hands-On Building Science with Matt Risinger & ThermalBuck

December 4, 2017 – Risinger & Co. Headquarters – Austin, TX
Don’t Miss this Event!

Risinger & Co. will present “Hands-On Building Science with ThermalBuck,” to the Austin green building community. You’ll see how easy it is to integrate ThermalBuck into a high-performance wall, to simplify the installation of windows with exterior insulation. Join your fellow architects, builders, energy consultants and more for this informative Lunch & Learn – just RSVP to save your space by December 1st!

December 4, 2017 @ 12 pm – Risinger & Co. Austin Headquarters
Window Installation with Exterior Insulation featuring ThermalBuck

Lunch & Learn with the Austin Green Building Community
5126 Burnet Rd, Austin TX 78756

RSVP required. Space is limited.

RSVP for Hands-On Building Science 12.4.17 in Austin – you will be contacted for confirmation:

Please contact us for more details, and follow us on social for specifics about the materials that will be part of this high-performance wall demonstration. Don’t miss your chance to be a part of this event for the Austin green building community!

Risinger & ThermalBuck: A High-Performance Duo

It was just about a year ago when Matt Risinger introduced ThermalBuck to his thousands of YouTube followers. We had recently met Matt in 2016 at the Energy & Environmental Building Alliance (EEBA) Conference in Dallas, TX, and he took home our tabletop displays to show to his loyal building science fans through a short video on Risinger Goes Rogue.

“Check out this brand-new product a builder in Pennsylvania invented – very cool.”

-Matt Risinger, Risinger & Co., The Build Show

Matt recognized ThermalBuck as a smart, simple solution to the challenges builders face when installing windows with continuous insulation. He also taught us about the importance of using only high-performance products in the building envelope (bye-bye, junky housewrap).

A ROESE between two…Matt Risinger & John Brooks at the 2016 EEBA conference.

WATCH: Risinger Goes Rogue featuring ThermalBuck

Matt is well-known for his expertise in building science, and his comfortable way of teaching others how to use to become better builders. Now we’re teaming up with Risinger & Co. at their Austin headquarters for a ThermalBuck installation demo – and we’re inviting you to join us.

Risinger & Co.

Matt’s company, Risinger & Co. is a sought-after Austin builder known for beautiful craftsmanship and attention to detail. But they’re also recognized for building some of the highest performing homes in Texas, and utilize a building science based approach to every project.

“Every project we take on includes our goal of delivering a home that provides for improved health, enhanced durability, increased efficiency and greater comfort than any home you’ve lived in before.”

-Matt Risinger, Risinger & Co., The Build Show

After many years of production homebuilding, and continually honing his skills and knowledge, Matt’s outstanding reputation has led him to now work primarily on architect driven projects, many of them award-winning. Most recently, for their work on a Design Office by Alterstudio Architecture, LLP – awarded a 2017 AIA Austin Design Award.

For more information about all of the 2017 award winners, visit aiaaustin.org.

We appreciate Matt sharing ThermalBuck with his avid followers, and look forward to our demonstration in Austin with Risinger Homes. One thing we can be certain of, is that everyone (including us) will learn a thing, or two.

Risinger Homes (now Risinger & Co.) started building exclusively for architects in 2005. Matt’s building science expertise has been documented in Fine Homebuilding, The Journal of Light Construction, and Custom Home Magazine, to name a few. He is also an award winning blogger, the two-time winner of the JDR Best Blogger Award. Enjoy the beauty and craftsmanship of Matt’s work through his instagram account, twitter, or facebook. The Texas building statistics sourced for this post were found at investopedia.com.